Current Location£ºAirrex > Product >> Clean Room Special Purpose Air Filter >> All categories
 

Terminal Module Filter

Terminal Filter Modules can be used in RCU system.  Typical applications include Clean Room Class 1 to 100K.   
All HEPA filter efficiency is tested in accordance with US MIL-STD-282 (EU Standard) and EN1822.   The series provide guarantee efficiency from 99.97%, 99.99% to 99.999% (EU12-EU14) or H10-H14 (per EN-1822 standard in MPPS Test) on 0.3 micrometer size particles HEPA filter; and 99.999% to 99.999999% or U15-U16 (per EN-1822 standard in MPPS Test) ULPA filter.
Frame is made by anodized extruded aluminum.  
Inlet size is available for 8¡±-14¡±.

Feature: High Quality Construction in a Highly Versatile Design.
Terminal Filter Modules are designed for standard T- bar ceiling grids or Gel seal ceiling grid system use. It's easy and simple to install and maintain these thin and lightweight units.

The module can be flexibly designed to meet customer spec¡¯s demand. By selecting among pack depth, media efficiency, air capacity and inlet size, the clean room designer can configure the unit to meet spec requirements and operating cost.

Depending on the number of units used in the ceiling, the rate of air recirculation and clean room overall design, Airrex Terminal Filter Modules is able to provide cleanliness levels from Class 1 to Class 100,000.

The unique Benefits:
To eliminate the concern of air blockage is better than Deep Pleat Type Air Filer.
With Anticorrosive and Anodized Extruded Aluminum Housing Construction.
Four (4) suspending holes to provide seismic protection and reduce the stress load of grid.
Dimpled inlet collars help to secure the HVAC ductwork and prevent slippage.
100% quality control- every unit is tested and certified to meet efficiency and pressure drop requirements.

Factory Testing
Airrex tests all terminal filter modules to be in accordance with the International Environmental Science recommended particles standard.  Test result including of penetration value and pressure drop (inch/w.g.) will be recorded on filter label and carton label.

Capacity vs Pressure Drop
The EN 1822 Test Machine examines each filter's Capacity vs. Pressure Drop.  Capacity test is according to volumetric parameters, i. e., 100 CFM per square foot of filter face area, which is an expression of the volume of air moving through the filter.

Scan Test
In addition to the efficiency test and penetration test, by using a laser particle counter to  scan each filter surface and edge to examine any pinhole leakage.  Readings greater than 0.01% of the upstream concentration are determined as unacceptable; the filter must be rejected or repaired and retested.

Efficiency:
According to European Standard EN1822, by testing the particle concentration of upstream & downstream area, efficiency is from 99.99% to 99.999% @0.3 micron (H13-14) size particles HEPA filter; and 99.999% - 99.999999% @ 0.1-0.2 micron (U15-U17) size particles ULPA Filter.

Media:
Media is made from ultra fine glass fiber formed with high density papers. Each pleat is spaced by hot-melt adhesive to allow air flow through the filter with minimum resistance.

Housing Material:
Anodized Extruded Aluminum construction. Inlet size is available for 8¡±-14¡±. Total Height is 150 mm excluding of the height of Inlet.  Height of Inlet is 80mm. Material of upper casing is 1.0mm thickness Painted Steel.

Performance Data


Material and Service Gonditions

Hits£º1565  Time£º2012-11-27 ¡¾Print¡¿ ¡¾Return¡¿
Product information Download (product details in PDF document download can not open a document, please install the PDF reader)
Product information£ºLocal download PDF reader£ºOfficial Download | Local download
 
 
Pre Efficiency Air Filter    |     Medium Efficiency Air Filter    |   High Efficiency Particulate Air Filter
Clean Room Special Purpose Air Filter    |   Chemical Air Filter    |   Clean Room Equipment    |    Professional Services

Copyright 2012 Airrex Co., Ltd. All Rights Reserved.
ADD£ºNo.92£¬Liang Chang Road£¬Jin tan Economic Development Zone£¬Changzhou City£¬Jiangsu Prov.
TEL£º0519-80193100 FAX£º0519-80193106  Su ICP 11004720 No.