High Efficiency Particulate Air Filter ¨C Mini Pleat V Type
HEPA media is made from glass microfiber. It is water resistant and can withstand temperature up to 350 ¡ãC. Use hot melting glue to replace traditional aluminum separators.
All HEPA filter efficiency is tested in accordance with US MIL-STD-282 (EU Standard) and EN1822. The series provide guarantee efficiency from 99.97%, 99.99% to 99.999% (EU12-EU14) or H10-H14 (per EN-1822 standard in MPPS Test) on 0.3 micrometer size particles HEPA filter; and 99.999% to 99.999999% or U15-U16 (per EN-1822 standard in MPPS Test) ULPA filter.
The frame is available for Metal Frame (Galvanized Steel) in box type or header type. It contains more media (up to 90%) than standard deep pleat type HEPA filters. With high capacity, low pressure drop & longer service life advantages, can be used to replace the traditional aluminum separators filters.
Features:
*More Effective Media Area
*High Capacity
*Low Resistance
*Long Life Span
AIRREX V-HEPA or V-ULPA filter is assembled by multiple mini-pleat packs formed into six to eight pieces of V type pleat. It contains more media (up to 90%) than standard W- HEPA filter, can easily remove air contamination such as fine dust, smoke, vapor, soot, pollen, bacteria and etc. The effective media area results in greater flow capacity, lower resistance, and longer life span. With high capacity, low pressure drop & longer life span advantages, can be used to replace the traditional aluminum separators filters.
Efficiency:
All HEPA filter efficiency is tested in accordance with US MIL-STD-282 (EU Standard) and EN1822. By measuring the upstream & downstream particle concentration, the series provide guarantee efficiency from 95%, 99.97%, 99.99% to 99.999% (EU12-EU14) or H10-H14 (per EN-1822 standard in MPPS Test) on 0.3 micrometer size particles HEPA filter; and 99.999% to 99.999999% or U15-U16 (per EN-1822 standard in MPPS Test) ULPA filter.
Media:
V-HEPA media is made from glass microfiber. It is water resistant and can withstand temperature up to 350 ¡ãC. Use hot melting glue to replace traditional aluminum separators.
The V-HEPA media is manufacture from glass microfiber. It is water resistance and can withstand temperature up to 350¡æ. The filter media is folded into mini-pleats and spaced by hot melting glue to ensure a best pleating geometry. Each media pack and frame end is completely sealed by fire-retardant epoxy, polyurethane foam or silicon sealant to ensure leakage free in a clean room.
Frame:
The frame is available for Metal Frame (Galvanized Steel, Aluminum,
Particleboard and Stainless Steel) in Box Type or Header type
 High Efficiency Filter Performance Data
Material and Service Gonditions
|
